INAP565TAQ / INAP595TAQ

APIX3 or APIX2 Transmitter with 12 Gbps for Video, Audio, Data and Ethernet w. MIPI DSI video input

The INAP565TAQ/INAP595TAQ together with an APIX3 receiver offer the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode it’s scalable physical layer provides bandwidth of up to 12 Gbps over distances of up to 10m at lowest EMI. Both devices offer a single MIPI DSI 1.2 video interface to handle one native or VESA DSC compressed video stream with 24 or 30-bit. The INAP595TAQ additionally includes HDCP 1.4 source encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and retransmission mechanisms

PRODUCT BRIEF

INAP565T APIX3 Transmitter w. DSI video input (1.4 MB)

Demonstration Kit
Features
  • Physical Layer
  • 6, 3 or 1.5 Gbps downstream
    -Support of 12 Gbps dual lane link
    -6+6 Gbps, 3+3 Gbps, 1.5 + 1.5 Gbps
  • 187.5Mbps upstream
  • Automatic link training
  • Supports STP (Shielded Twisted Pair), QSTP or Coax cables
  • Support to drive 2 receivers simultaneously
  • APIX2 compatible
  • Single Video Channel supports
  • Uncompressed video transmission up to 3840x1080 30bit @60Hz
  • VESA DSC compressed video up to 3840x2160 24bit @60Hz (4K2K) over single lane
  • Supports 18/24 or 30-bit color depth
  • Video integrity support
  • MIPI DSI 1.2 video interface (1x4)
  • DPHY 1.2 up to 1.5 Gbps/lane
  • Support for VESA DSC tunneling
  • HDCP 1.4 encryption engine (INAP595T)
  • Full-duplex communication channels for Data, Ethernet or GPIO
  • 2 MII/RMII/RGMII interfaces
    -10/100 Mbps support
  • SPI data interfaces
  • Up to 4 GPIO Flags per receiver for protected signaling over AShell (APFLAG)
  • Embedded AShell protocol data protection layer
  • I²S Audio interface
  • Supports 16/24/32 Bit word length
  • Supports up to 192kHz sampling
  • TDM support for up to 8 channels
  • Diagnostic Features:
  • Built-in PRBS generator and checker
  • Continuous link monitoring
IBIS Model
INAP595TAQ APPLICATION